Aluminum Composite Material (ACM)

Alulmiun Composite Material

ACM Wall Panel Systems

Series NameSeries 1000
Series DetailsFace fastened system
Series NameSeries 3000
Series DetailsSeries 3000 is a wet-joint weather-tight system with a shallower 1 7/8" system depth and 1/2" joints.
Series NameSeries 4000
Series DetailsSeries 4000 is a rainscreen system with a 2 1/4" system depth with 1/2 joints with a reveal strip. It is our most popular system.
Series NameSeries 5000
Series DetailsSeries 5000 is designed to be a pressure equalized rainscreen system with mitered extrusion, 2 1/4" system depth, 1/2 joints and a reveal strip.
Click on images to see architectural details

Series 3000 Details

Horizontal Seam - Click for details

The horizontal seams are the long rows on the tops and bottoms of the ACM panels

Vertical Seam - Click for Details

The vertical seams run up and down to the left and right of each panel.

Outside Corner - Click for Details

The outside corner is created by bending the ACM around the structure folding the panel away from the face of the panel.

Inside Corner - Click for Details

The inside corner is when the structure juts out and the panel folds in towards it’s face to wrap the structure.

Click on images to see architectural details

Series 4000 Details

Horizontal Seam - Click for details

The horizontal seams are the long rows on the tops and bottoms of the ACM panels

Vertical Seam - Click for Details

The vertical seams run up and down to the left and right of each panel.

Outside Corner - Click for Details

The outside corner is created by bending the ACM around the structure folding the panel away from the face of the panel.

Inside Corner - Click for Details

The inside corner is when the structure juts out and the panel folds in towards it’s face to wrap the structure.

Click on images to see architectural details

Series 5000 Details

Horizontal Seam - Click for details

The horizontal seams are the long rows on the tops and bottoms of the ACM panels

Vertical Seam - Click for Details

The vertical seams run up and down to the left and right of each panel.

Outside Corner - Click for Details

The outside corner is created by bending the ACM around the structure folding the panel away from the face of the panel.

Inside Corner - Click for Details

The inside corner is when the structure juts out and the panel folds in towards it’s face to wrap the structure.

Projects with uNeeke Inc ACM Panels

Installed